| MEC320TSMicroM MEC320 chassis with remote communications and independent relay output. For use with MEP300 and 600 series programmers. Use with MEP696 programmer only.
|
|
|
| MEC480MicroM chassis with local reset; 230 VAC, 50/60 Hz, provides independent relay outputs on terminals 3 and 4. For use with MEP300 and 600 series programmers.
|
|
|
| MECD1Cadmium sulfide amp, 0.8 sec FFRT. Use with C554A scanner.
|
|
|
| MECD4Cadmium sulfide amp, 3 sec FFRT. Use with C554A scanner.
|
|
|
| MED1Standard daughter board, local reset switch.
|
|
|
| MED2Daughter board with local reset switch, display output.
|
|
|
MED3 "Daughter board with local reset switch, remote reset. ![]() "
|
|
|
| MED4Daughter board with local reset switch, display output and remote reset.
|
|
|
| MED5Daughter board with local reset switch, display output and communications.
|
|
|
| MED6Daughter board with local reset switch, display output, remote reset, and communications.
|
|
|
| MED7Daughter board with local reset switch, communications.
|
|
|
| MEDC2Amplifier for use with dry contact input from 85UVF-WR flame scanner, 0.30 sec FFRT. Use with MEP237 and 85UVF4-1WR.
|
|
|
| MEIR1Infrared amp, 0.8 sec FFRT. Use with 48PT2 scanner.
|
|
|
MEIR4 "Infrared amp, 3 sec FFRT. Use with 48PT2 scanner. ![]() "
|
|
|
MEP100 "Programmer, Relight function, 10 sec PTFI. ![]() "
|
|
|
| MEP100PProgrammer, Relight operation, 10 sec PTFI, 15 sec post purge.
|
|
|
| MEP101Programmer, Relight function, allow flame signal until 60 seconds after interlock circuit closes.
|
|
|
| MEP102Programmer, Non-recycle on flame fail, 5 second PTFI.
|
|
|
| MEP103Programmer, Fixed 10 sec SISP*, 10 sec MTFI, re-try once on pilot failure, fixed 30 sec post purge. *Spark Igniter Sensing Period
|
|
|
| MEP104Programmer, Non-recycle on flame fail, 10 second PTFI.
|
|
|
